Surgery Product Applications Available In Africa

Medical and life science manufacturers are pressured to drive continual innovation and advancement with short time-to-market goals. These industries also demand strict process controls and quality standards. Success often rests on the ability to choose the right partner — one that can be trusted to have the right knowledge and experience to help them meet these stringent ...

By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).

Coriolis air sampler collects biological particles in the air for biocontamination control in a biomedical and health ...

By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.

Pathological waste is basically the by-product from operations and other types of surgery. Incineration is still the recognised way to safely dispose of all kinds of pathological ...

By Inciner8 Limited based in Southport, UNITED KINGDOM.

Laser micro processing is a technology that enables the manufacturing of components with micron accuracy. For the medical application such as stent therapy (especially in coronary heart disease), catheters, IOL (Intraocular Lenses), vascular clips, surgical staples, hollow needles, endoscopes, hypo tubes the highest micro material processing quality demands. Laser micromachining provides extremely gentle processing method that causes continuous growth of this industry. The ultrashort high-energy laser pulses allow ...

By AKONEER based in Vilnius, LITHUANIA.

The diagnosis of heart failure typically starts when a patient talks to their caregiver about the signs and symptoms they are experiencing. Their health care provider may ask questions designed to confirm the causes of heart failure that may be in their medical history as ...

By Impulse Dynamics based in Marlton, NEW JERSEY (USA).

We offer quality infection prevention solutions that help increase compliance, improve back office efficiencies and enhance quality patient care. Our complete line of infection control products will help medical facilities meet today’s complex, competitive, and compliance-driven needs. Medical areas served: Acute Care, Alternate Care, Long-Term Care, Surgery Centers, Primary Care, and Outpatient ...

By Metrex Research, LLC. based in Orange, CALIFORNIA (USA).

At Nexstim we are using decades of scientific research to help alleviate drug-resistant brain diseases and disorders. As the world’s leading company combining TMS with 3D brain imaging, we offer a powerful noninvasive technique for the relief of chronic, refractory neuropathic ...

By Nexstim Plc based in Helsinki, FINLAND.

The term plasmapheresis encompass different techniques (filtration or adsorption on plasma), which remove not all but only specific elements contained in the plasma, and altogether allow to treat a large number of diseases. ...

By Infomed SA based in Meinier, SWITZERLAND.

Embracing the use of HBOT to favor aesthetic objectives is a relatively new approach to an ever-growing complementary treatment, oxygen ...

By OXYHELP INDUSTRY based in Bucuresti, ROMANIA.

Our powerful, earth-friendly cleaners are available in a wide range of formulas to meet specific cleaning requirements. Our cleaners are designed to quickly and effeciently remove blood, feces, urine, mucus, fat, sweat, tissue, and other biological debris. Common uses include cleaning diagnostic and surgical instruments, life-support devices, hospital furnishings, and institutional linens. For most applications a 0.5% - 2.0% solution is effective, and validation methods are available. ...

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Advances in biomedical implant and device technology continue to present new challenges in the area of physical testing. Particle Size Distribution, Surface Area and Porosity measurement data are invaluable to the biomedical researcher. PTL partners with each client to design projects that provide this needed information while controlling the costs of research. Applications have included particle size analysis of wear particles in fluid submitted from implant fatigue studies and pore size analysis of tricalcium ...

By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Heart Failure may start suddenly, and you may feel symptoms immediately, or it may start slowly and progress unnoticed for some time. Some patients do not realize that they have heart failure because they believe that their symptoms are just indications of getting older. The condition typically starts after there is some sort of injury to the heart muscle (e.g. a heart attack), and over time, the unusual stresses placed on the heart muscle cause the disease to progressively ...

By Impulse Dynamics based in Marlton, NEW JERSEY (USA).

This stapler can simultaneously insert three rows of cross-studded staples on both sides of the tissue, and then use a push knife to cut between the already sewed tissues on both sides to cut and suture the tissue. The GIA surgical stapler is suitable for thoracic surgery, general surgery, urology, obstetrics, and gynecology, such as lobectomy, gastrointestinal anastomosis, etc. GIA stapling device has larger jaws to help adjust the position, which helps to adjust the position. Many GIA firing button designs are ...

By Victor Medical Instruments Co., Ltd based in Changzhou, CHINA.

Shorten product development, increase reliability, and benefit from compliance expertise. Increased lifestyle conditions, patient lifespans, and outpatient procedures are transforming medical equipment. Equipment needs to be more mobile, include data storage and insight capabilities, and be more precise than ...

By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).

Lasers have been used in dentistry for approximately two decades. For many intraoral soft tissue surgical procedures, the laser is a viable alternative to the scalpel. There are many categories of soft tissue procedures that can be treated by ...

By PIOON based in Wuhan, CHINA.

This category includes various products and materials collected in hospitals: hazardous waste (eg catheters, disposable gloves, test tubes, disposable gowns, material for dressing, etc.). lab hazardous waste as a result of the carrying out of research activities and bacteriological diagnostics (for example: land plates, contaminated culture, etc.). cutting waste (for example: needles, syringes, scalpels, etc.). unrecognizable organs and body parts empty containers (for example: of medicines, of disinfectants, of ...

By SatrindTech Srl based in Arluno, ITALY.

In modern medicine there is a constant demand to collect data about patients’ physical, physiological and behavior, monitor medical instruments inside hospitals to reduce multiple systems or shortage, monitor hospital staff’s hygiene with a dedicated bracelet and many other applications that requires monitoring and data ...

By Sol Chip Ltd. based in Haifa, ISRAEL.

Our system, originally designed for hospitals and cleanrooms, secures ultra pure indoor air in dental practices, laboratories and waiting rooms. Safeguarding staff and patients from small particles as small as 0.003 μm is an essential part of dental ...

By Genano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND.

Dental laser treatment for periodontal disease was one of the first reasons why the technology was developed. Diode lasers are able to help destroy infectious bacteria and remove heavy amounts of ...

By PIOON based in Wuhan, CHINA.

Nanoscale air decontamination for hospitals, clinics and laboratories. Genano Technology is scientifically proven to capture nano sized particles and eliminate 99,999% of microbes from indoor air. ...

By Genano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND.