Hiv Infected Equipment & Supplies
-
Manufactured by Maxim Biomedicalbased in USA
The Maxim Swift HIV Recent Infection Assay (RIA) is a single use qualitative immunoassay to detect the circulating antibodies to Human Immunodeficiency Virus Type 1 (HIV-1), Type 2 (HIV-2) and distinguish between recent and long-term infection in HIV-1/2. ...
-
Manufactured by Maxim Biomedicalbased in USA
The Maxim Swift HIV Recent Infection Assay (RIA) Kit Controls are quality control reagents for use only with the Maxim Swift™ HIV Recent Infection Assay (RIA) (P/N 92002). They are used to verify that the test kit reagents are working and that the test is performed correctly. ...
-
Manufactured by Athenese Dxbased in INDIA
The TRUSTline HIV-Ab/Ag 4th Gen Rapid Test detects HIV p24 in addition to IgG and IgM enabling HIV infection to be caught as early as 16 days post-infection. ...
-
Manufactured by Sedia Biosciences Corporationbased in USA
A rapid, 20 minute in vitro immunoassay that differentiates recent from long-term HIV-1 infections for real time surveillance of new HIV-1 infections and the estimation of HIV-1 incidence rates in a population.* The assay can be used with blood (both venous and fingerstick), serum, or plasma specimens as either a ...
-
Manufactured by ELITechGroupbased in FRANCE
Pneumocystis pneumonia (PCP) is an opportunistic disease caused by invasion of the unicellular fungus Pneumocystis jirovecii (PJ). In lungs PJ exists in trophic and cystis form and it is one of the most frequent and severe opportunistic infections in people with weakened immune systems. PCP a major cause of morbidity and mortality among ...
-
Manufactured by Maxim Biomedicalbased in USA
Maxim's FDA Approved HIV-1 Urine EIA test is an enzyme immunoassay for the in-vitro detection of antibodies to Human Immunodeficiency Virus Type 1 (HIV-1) in urine. The test is intended for use in professional laboratory settings as an aid in clinical diagnosis of HIV infection. ...
-
based in USA
Latently infected cells remain a permanent source of viral reactivation. For this reason, the eradication of viral reservoirs is at present the major goal for HIV-1 therapeutics. ...
-
Manufactured by Maxim Biomedicalbased in USA
The Maxim HIV-1 Limiting Antigen-Avidity EIA is an in-vitro quantitative limiting antigen (LAg) avidity enzyme immunoassay for distinguishing recent HIV-1 infections from those which are long-term. Persons with recently acquired HIV-1 infections typically exhibit HIV-1 specific IgG populations ...
-
Manufactured by Bio-Rad Laboratories, Inc.based in USA
This kit is intended as an aid in the diagnosis of infection with HIV-1 and/or HIV-2, including acute (primary) HIV-1 infection. The assay may also be used as an aid in the diagnosis of infection with HIV-1 and/or HIV-2 in pediatric subjects as young as two years ...
-
Manufactured by Sedia Biosciences Corporationbased in USA
An in vitro single well quantitative limiting antigen avidity enzyme immunoassay for distinguishing recent HIV-1 infections from those which are long-term. Intended for use with liquid serum or plasma specimens. ...
-
Manufactured by Menssana Research Inc.based in USA
Once thought to be a near-conquered disease, pulmonary TB is now killing more people than ever, especially those infected with HIV in developing countries. That ’s why there ’s an urgent need for a rapid, accurate and cost-effective point of care test for pulmonary TB is Breath testing could provide such a test because the mycobacteria that cause ...
-
Manufactured by Span Biotech Ltdbased in CHINA
World-wide an estimated 17 million cases and 600,000 associated deaths occur annually1. Patients who are infected with HIV are at significantly increased risk of clinical infection with S. typhi2. Evidence of H. pylori infection also presents an increase risk of acquiring typhoid fever. 1-5% of patients become chronic carrier ...
-
Manufactured by Avioq, Inc.based in USA
The Avioq HIV-1 Microelisa System is intended for use as an aid in diagnosis of infection with HIV-1. It is not intended for use in screening blood donors. Developed as a standard two-step indirect microelisa system assay, the Avioq HIV-1 Microelisa System contains coated 96-well microwell plates, color-coded, liquid calibrator ...
-
based in USA
DELSTRIGO (doravirine, lamivudine, and tenofovir disoproxil fumarate) tablets, for oral use Initial U.S. Approval: ...
-
Manufactured by Pepex Biomedical, Inc.based in USA
Button Style 3E LS Sensor Module for Single or Continuous Monitoring. Single and Continuous Monitoring (coin-sized, attaches to skin and transmits data to connected ...
-
based in GERMANY
The rapid test to detect fiv antibodies in blood of cats: Can be used directly at any place, with results available within a few minutes, Economical screening test for serum, plasma and wholeblood, Easy on-site usage, All items required are included in the testkit, Storage at 15-30 degrees, FIV: sensitivity 91,67%, specificity ...
-
Manufactured by SMB Corporation Of Indiabased in INDIA
Each SMB Copper T 380A frame is made from compound of Low Density Polyethylene and Barium Sulphate (15% -24%) wound with 176mg of 0.25mm diameter copper wire, and two copper sleeves on horizontal arm providing a surface area of 380 mm2. The T is equipped with high-density polyethylene filament for easy removal. It is packed together with an Insertion Tube and Solid Rod in a Tyvek-Mylar film pouch ...
-
Manufactured by Pepex Biomedical, Inc.based in USA
Single Point 3E LS Sensor Module made for Hand-held ...
-
Manufactured by SMB Corporation Of Indiabased in INDIA
Each modified T shaped frame of SMB TCu 380 Plus is made from compound of Low Density Polyethylene and Barium Sulphate (15% -24%) wound with 0.40mm diameter copper wire providing a surface area of 380mm2 ± 23mm2. The T is equipped with polyamide monofilament thread (suture)for easy removal. It is packed together with an Insertion Tube and Rod in a Tyvek-Mylar film pouch or Mylar-Mylar film ...
-
Manufactured by SMB Corporation Of Indiabased in INDIA
Each SMB Cu 250 frame is made from compound of Low Density Polyethylene and Barium Sulphate(15% - 24%) with two flexible arms with spurs. 99-99% purity OFE Copper wire (Diameter 0.30 mm ± 0-01 mm) is wound around the stem, giving a total copper surface area of 250mm; ±20mm2. The 'Frame' is equipped with Polyamide Monofilament (Suture) for checking the presence/position of IUD and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you