Surgical Technique Equipment & Supplies
-
based in UNITED KINGDOM
The H1 is a contoured ceramic-on-ceramic hip resurfacing arthroplasty system. It consists of two monoblock implant components (femoral head and acetabular cup) made of BIOLOX®delta with vacuum-plasma-sprayed titanium and hydroxyapatite for cementless fixation. The contours of the H1 components are designed to better reflect the native morphology of the femoral head and acetabulum. The H1 is ...
-
Manufactured by Shoulder Innovationsbased in USA
The InSet PLUS augmented glenoid offers surgeons the ability to dial the augment to the area of greatest defect. The InSet PLUS was designed to offer additional correction of the glenoid as it allows for the combination of eccentric reaming with an additional 5 & 10 degrees of correction. Like the standard InSet Glenoid, the InSet PLUS Augmented Glenoid has the same flat back design, which ...
-
Manufactured by Ophtec BVbased in NETHERLANDS
Foldable iris fixated IOL designed for a spherical and cylindrical correction of low, moderate and high myopic ...
-
based in USA
CoLink® Bone Graft Harvester is available in two Outer Tube diameters: 6mm and 8mm. ...
-
Manufactured by FreeHold Surgical, LLCbased in USA
The FreeHold Trio Retractor may be used for applications where a sling-based retraction is more applicable, such as liver or uterus ...
-
Manufactured by FreeHold Surgical, LLCbased in USA
The FreeHold Duo Retractor may be used for direct organ or tissue retraction including the gallbladder, colon, bladder, ...
-
based in USA
The AlloAid® DIP is a sterile, engineered Allograft. The Allograft is supplied in 2 sizes. The AlloAid® DIP complies with all FDA, AATB and state regulatory requirements for donor screening, recovery and ...
-
Manufactured by BPB MEDICAbased in ITALY
Most annulus fibrosus lesions are the result of repeated microtraumas or a major trauma that degenerates to allow the nucleus pulposus to bulge and compress the spinal cord or a nerve, causing pain in the back and the legs. When conservative treatment fails and symptoms persist or worsen, surgical treatment is ...
-
Manufactured by BPB MEDICAbased in ITALY
The TOTALLY REMOVE™ needle allows users to perform bone marrow biopsies on the iliac crest. With this particular system, called “TOTALLY”, it is possible to avoid the dislocation manoeuvre when the sample is being withdrawn. The sample is blocked inside the system. With a single hole in the patient, it is possible to perform both a histological and a cytological ...
-
based in USA
“The indications for surgical management of radial head fractures are not well defined in the literature. Fragment size, number, degree of displacement and bone quality influence decision making regarding optimal management. Associated injuries and a block to motion are also important factors to consider. ...
-
Manufactured by EOS MEDICAL SOLUTIONS (EOSMED)based in BULGARIA
The proximal and distal surfaces of the cage are designed in an inverse v-woven pattern to prevent its dislocation. Adequate spacing over the cage allows for achieving the intended fusion by using the grafting technique. In this product group, two different PLIF Cages are ...
-
Manufactured by EOS MEDICAL SOLUTIONS (EOSMED)based in BULGARIA
The proximal and distal surfaces of the cage are designed in an inverse v-woven pattern to prevent its dislocation. Adequate spacing over the cage allows for achieving the intended fusion by using the grafting technique. In this product group, two different PLIF Cages are ...
-
Manufactured by Centinel Spinebased in USA
The most studied and clinically-proven total disc replacement technology in the world. Determined Safe & Effective for SCDD: The prodisc C Nova Total Disc Replacement is intended to replace a diseased and/or degenerated intervertebral disc of the cervical spine in patients with symptomatic cervical disc disease (SCDD). The prodisc C Nova Total Disc Replacement surgery is intended to: ...
-
Manufactured by InsEYEt, LLCbased in USA
This model may also be used for placing iris hooks or for practicing IOL cutting and removal in the anterior chamber. With proper care and surgical technique, this model is designed to be re-used multiple ...
-
Manufactured by Exactech, Incbased in USA
The Novation Element’s tapered-wedge stem philosophy and its extensive hydroxyapatite coating, utilizes design and surgical technique principles based upon more than 25 years of clinical use. ...
-
Manufactured by TriMed Inc.based in CAMBODIA
Merging the plate, cutting guides and compression tool lead to a precise, reproducible result. Precise parallel cuts. Controlled compression of the osteotomy. Single reference point surgical ...
-
Manufactured by Cerebro Spinebased in TURKEY
The Cerebro Facet Implant System is designed to provide stabilization between facet joints and, in accordance with a minimally invasive surgical technique, is manufactured as two different models in one piece from titanium alloy conforming to medical ...
-
Manufactured by Clariance SASbased in FRANCE
Smart Pivoting System: Controlled pivoting system, optimal implant positioning, reliable and repeatable surgical technique. Bullet-Shaped Nose: Self-distracting bullet nose facilitates insertion especially into collapsed disc ...
-
Manufactured by ARCH Medical Solutions Corp.based in USA
Adoption is growing for 3d-printed hip, knee, and shoulder systems. By leveraging lattice structures for osseointegration, new bone-conserving surgical techniques become possible. Join the movement to additively manufactured joint replacements and be part of the ...
-
Manufactured by Locate Bio Limitedbased in UNITED KINGDOM
Despite advances in surgical techniques and fixation, the treatment of open tibial shaft fractures continues to be associated with high rates of delayed union and nonunion.1, 2, 3 Delayed healing of tibial fractures is reported to be more likely in the presence of infection.4, 5 which increases the risk to the patient of amputation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you