Patient Transport Equipment & Supplies Near Switzerland
-
Manufactured by Vyaire Medical Pty Ltdbased in AUSTRALIA
The Vyaire ReVel Ventilator is a portable ventilator offering both pediatric and adult patients in emergency transport for patients who weigh a minimum of 5 kg (11 lbs) It is suitable for service in home-care, hospital and transport environments as a source of continuous or intermittent positive pressure ventilation support, ...
-
Manufactured by ICU Medical, Inc.based in USA
Tracheal tubes with a suction port above the cuff can assist in reducing the rate of ventilator-associated pneumonia. The Portex® Suction Above the Cuff Endotracheal Tube (SACETT®) is part of the Blue Line® range of Endotracheal tubes. It has been specifically designed to reduce VAP. The SACETT® combines the quality features of the Blue Line® range with the ability to remove ...
-
Manufactured by ICU Medical, Inc.based in USA
Diana fits under the hood of a biological safety cabinet and uses many of ICU Medical’s proven ChemoClave® components to protect clinicians from exposure to hazardous drugs and accidental needlesticks, while protecting the final patient preparation from exposure to environmental ...
-
Manufactured by Samarit Medical AGbased in SWITZERLAND
The SAMARIT Transglide supplements the Rollboard products lines in places where there are no height-adjustable beds or couches. It is a handy transfer aid and helps healthcare professionals with the horizontal transfer of patients from one bed to another in care homes, hospitalsand for care at home. One or two carers perform the transfer with a pulling movement using a pull ...
-
Manufactured by Samarit Medical AGbased in SWITZERLAND
This sliding board GLIDEBOARD makes it easier for healthcare professionals to transfer patients from the edge of the bed to a wheelchair. The product is used mainly today to transfer patients from wheelchairs into large vehicles (SUVs etc.). It is made of unbreakable material (HDPE), is acid resistant and easy to clean and disinfect. ...
-
Manufactured by Samarit Medical AGbased in SWITZERLAND
The original GLIDEBOARD «Banana» sliding board is a very tried and tested classic from Switzerland, developed with therapists by SAMARIT and patented as a design. This sliding board is often used in particular to enable sedentary patients to transfer independently to wheelchairs, car seats or chairs. It has been made of unbreakable material (HDPE), is acid resistant ...
-
Manufactured by Samarit Medical AGbased in SWITZERLAND
With our innovative products we help healthcare professionals and their patients to acomplish this transfers. Lifting and transferring patients play a critical role in all areas of care. The spines of carers are under constant strain when continuously moving patients from one bed to another.The SAMARIT ROLLBORD take off the strain from healthcare ...
-
Manufactured by Nobel Biocarebased in SWITZERLAND
Choose between a versatile device covering all your basic needs and a premium device with additional comfort ...
-
Manufactured by Black Forest Medical Groupbased in GERMANY
These special headrest systems are custom made for selected OR table / MRI Scanner combinations and allow stabilizing the patient’s head in a safe and secure position for surgery including the patient transfer to MR imaging. ...
-
Manufactured by Black Forest Medical Groupbased in GERMANY
Especially when seamlessly combining different imaging modalities like instantly fusing Angio and CT images or transferring the patient to the MRI for an intra-op scan. ...
-
Manufactured by Cizeta Medicali S.p.A.based in ITALY
Medical device with the aim to indicate all different parameters of the Manual Lymphatic ...
-
Manufactured by PVS SpAbased in ITALY
EN 1865 Produced in anodised luminium,specially designed to be placed underneath the injured (broken back bone etc.) by uncoupling either end of the stretcher and gently scooping the patient, using a scissor type closing motion. It has a secure open/close device and a regulated length easy lock system. The contoured surface is specially made to reduce any eventual movements of ...
-
Manufactured by Villa Sistemi Medicali Spabased in ITALY
The full range of functionality converts the bucky room into a multipurpose system able to perform a wide range of exams on any patient. ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
The MOTOmed layson.l is a versatile medical device that provides passive, motor-assisted and active training of the lower extremities for patients in intensive care units, critical care, early rehabilitation and ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
The MOTOmed layson.la prof was designed specifically to meet the demands of clinics. This versatile medical device provides patients in intensive care units, critical care and early rehabilitation with passive, motor-assisted and active training of both the legs and arm/upper ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
The MOTOmed layson.la is a versatile medical device that provides patients in intensive care units, critical care and early rehabilitation with passive, motor-assisted and active training of the legs as well as the arms and upper ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
Equipped with pediatric safety foot shells and pediatric handles, the MOTOmed layson kidz.la is a versatile medical device that provides passive, motor-assisted and active training of both legs as well as arms and upper body for children in intensive care units, critical care and early ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
Equipped with pediatric safety foot shells, the MOTOmed layson kidz.l is a versatile medical device that provides passive, motor-assisted and active training of the lower extremities for children in intensive care units, critical care and early ...
-
Manufactured by RECK-Technik GmbH & Co. KG Medizintechnikbased in GERMANY
The MOTOmed layson.l dia is a versatile medical device that provides patients with passive, motor-assisted and active training of the lower extremities in their daily dialysis routine. With the integrated and regular MOTOmed Movement Therapy during dialysis, the blood washing process can be optimized. Moreover, the achieved increase in strength and endurance can improve the ...
-
Manufactured by Nuova BNbased in ITALY
The multifunctional specialistic stretcher combines versatility with high quality standards in order to be easily adaptable to satisfy all hospital needs, from comfortable transport of patient to more specialistic activities. The particular “C” shape of the base warrants stability and easily access for the health care professionals during their ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you