Patient Transport Equipment & Supplies Near Malaysia
-
Manufactured by Vyaire Medical Pty Ltdbased in AUSTRALIA
The Vyaire ReVel Ventilator is a portable ventilator offering both pediatric and adult patients in emergency transport for patients who weigh a minimum of 5 kg (11 lbs) It is suitable for service in home-care, hospital and transport environments as a source of continuous or intermittent positive pressure ventilation support, ...
-
Manufactured by MTTS Co., Ltd.based in VIETNAM
Clinical evaluations indicate that Firefly’s double-sided design reduces total treatment time by 40% on a typical patient compared to single-sided LED phototherapy, allowing earlier discharge from the hospital, lowering incidence of newborn infection and freeing resources to treat more ...
-
Manufactured by MTTS Co., Ltd.based in VIETNAM
Impala ventilator is an invasive mechanical ventilator with 8 ventilation modes ACVCV, AC-PCV, SIMV-VC, SIMV-PV, VCV/ PS, PCV/PS, CPAP, BiPAP and HFNC intended to use in intensive care units or transportation of emergency patients. The device contains a built-in pump, blender, flow, and pressure sensors that allows oxygen-rich (>21% O2) air with accurate ...
-
Manufactured by Kyoto Kagaku Co., Ltd.based in JAPAN
For patient-friendly and accurate positioning learning; Supports scenario based trainings including communication ...
-
Manufactured by Time Medical Holdingbased in CHINA
The NEONA MRI was designed from the onset to address very special needs including the Neonates that reside in the neonatal intensive-care unit (NICU) of large Medical Facilities. The design plan involved addressing two major problem areas that are particularly unique for this segment of critically ill infants. ...
-
Manufactured by Ambulanc (Shenzhen) Tech. Co., Ltdbased in CHINA
It is battery-operated and lightweight, making it easy to carry and move from one place to another within or outside the hospital. This compact turbine-driven ventilator can provide high pneumatic power without a gas ...
-
Manufactured by Ambulanc (Shenzhen) Tech. Co., Ltdbased in CHINA
Comprehensive ventilation modes for great adaptability to all kinds of demanding clinical scenarios for a wide range of patients. It can treat Infants, Pediatrics, and Adults. ...
-
Manufactured by Shenzhen Delica Medical Equipement Co.,Ltdbased in CHINA
WIT-S300N handheld oximeter is suitable for home measure-ment of blood oxygen, pulse rate and perfusion index ,They can be used for a variety of patients including but not limited to hospital's operation room, ICU, clinic section office, outpatient department, sickroom, emergency treatment, and recovery. They can also be used in health care organizations, at home or while ...
-
Manufactured by Trivitron Healthcarebased in INDIA
The eVolution 3e Ventilators are available in two variants; External Compressor based technology & Built-in Turbine based technology. These ventilators are a result of a new paradigm shift in ventilator design that makes it extremely efficient and ...
-
Manufactured by BPL Medical Technologies Pvt Ltdbased in INDIA
The BPL M-RAD 3.6 with its ultra high frequency (100KHz) technology ensures that only a useful dose is produced over the entire duration of the exposure while suppressing the skin dose. Being easy to maneuver, it is ideally suitable for Intensive care,cardiac care, bedside radiography in patient wards, where transporting the patient to the ...
-
Manufactured by BPL Medical Technologies Pvt Ltdbased in INDIA
BPL M-Rad 100 is a 100 mA, 100 PPS line frequency mobile X-ray solution that combines excellent manoeuvrability & user interface and is ideal for patient wards, intensive care, operating room etc., where transporting the patient to the Radiology department is difficult. Device comes with anatomical programming feature which ensures optimal ...
-
Manufactured by Penlon Limitedbased in UNITED KINGDOM
The Penlon AnaVue 4000 Patient Monitor is a sophisticated system that delivers continuous monitoring and data upload during patient transfers. Modular patient monitor for anaesthesia and critical care. User-defined multi-parameter display. Seamless monitoring with the EMS plug-in module. ...
-
Manufactured by Charder Medicalbased in TAIWAN
Measurement of patient weight is essential for administration of correct drug dosages and treatment. The MS7800 Patient Transfer Board is specially designed for patients that are difficult to weigh on conventional scales - it is light, portable, easily cleaned, and perfect for emergency room situations. ...
-
Manufactured by Charder Medicalbased in TAIWAN
The MS2580 medical handrail scale's low-profile, anti-slip platform, handrails, and high capacity makes it an ideal measurement station for patients who need additional support while standing. The platform is reinforced and wide enough to accommodate a chair for patients who cannot stand, and the ultrasonic stadiometer automatically measures height in seconds, ...
-
Manufactured by Unicare Emergency Equipment Pvt. Ltd.based in INDIA
FRP Ambulance Boat is used to attend & transport patients through water ways. FEATURES: Available in various sitting capacities,Equipped with essential medical equipment, battery & solar charging system,Equipped with standard boat accessories,Equipped with fire & safety ...
-
Manufactured by ICU Medical, Inc.based in USA
Diana fits under the hood of a biological safety cabinet and uses many of ICU Medical’s proven ChemoClave® components to protect clinicians from exposure to hazardous drugs and accidental needlesticks, while protecting the final patient preparation from exposure to environmental ...
-
Manufactured by ICU Medical, Inc.based in USA
Tracheal tubes with a suction port above the cuff can assist in reducing the rate of ventilator-associated pneumonia. The Portex® Suction Above the Cuff Endotracheal Tube (SACETT®) is part of the Blue Line® range of Endotracheal tubes. It has been specifically designed to reduce VAP. The SACETT® combines the quality features of the Blue Line® range with the ability to remove ...
-
Manufactured by Suzhou BDFUJI Elevator Co., Ltd.based in CHINA
Hospitals which have a high movement of people and other effects, have to have lifts for transporting patients and equipment. Some elevators, for the specific services provided in hospitals, must possess specific characteristics. BDFUJI ELEVATOR bed elevators meets highest requirements of modern hospitals and care institutions. ...
-
Manufactured by Changzhou Munk Foam Technology Co.,Ltdbased in CHINA
Flocked Sampling Swab used for cell & virus specimen collection and it has been designed for Nasopharyngeal clinical diagnostics. It utilizes state of the art "spray on technology"that the flocking process by means of an electro-static charge perpendicularly attaches millions of nylon microfibers on the medical grade handle tip. ...
-
Manufactured by YEARSTAR HEALTHCARE TECHNOLOGY CO.,LTDbased in CHINA
Product name: YearStar Air Transfer Sheet System (Air transfer sheet+air blower), Size: 40" *80", Color: silver grey&navy blue and any color required, Material: polyester fiber, Weight Capacity: 1000lbs, Application: patients lateral transfer, boosting, turning and positioning. Laundry care: Do not iron in case of shrinkage and product break ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you