Refine by
Leg Length Equipment & Supplies
54 equipment items found
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The trapezoidal design of the PediatrOS™ RigidTack™ staple is closely aligned to the anatomy of the femur and tibia. Cannulated legs allow accurate placement using K-wires. Low fluoroscopy times are another advantage. The PediatrOS™ RigidTack™ is the only growth arrest implant on the market specifically developed and approved for correcting ...
Manufactured by:OPED Medical Inc. based inBraselton, GEORGIA (US) (USA)
EVENup ® is an orthotic shoe lift that is used for compensating temporary leg length discrepancy. EVENup ® was developed by two Podiatrists in Ft Myers, Florida, after hearing complaints from patients wearing a fracture boot. The patients were experiencing pain in the back, hip and/or knee due to uneven gait when walking with an orthotic walking ...
Manufactured by:Vooner FloGard Corporation based inCharlotte, NORTH CAROLINA (USA)
The unloader pump design is used when there is not room to have the required drop leg length. These pumps require 0 NPSH and have the option of being flanged for easy maintenance. Unloader pump standard in CD4MCu. Stainless Steel upgrade available. Horsepower required is dependent on pressure and flow ...
by:OrthAlign Inc. based inAliso Viejo, CALIFORNIA (USA)
Technology that navigates cup placement and measures changes in leg length to improve accuracy, reduce outliers and minimize the need for ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The TaperSet Hip System combines design enhancements that restore leg length, stability, offset and ROM precisely and reliably. The TaperSet Hip System features a reduced distal profile that addresses proximal/distal ...
Manufactured by:Modular Pontoon Systems BV based inAalst (GLD), NETHERLANDS
Side depth: 2.44 m. (8 ft); Water depth: 18.0 m; Spud legs: 4; Spud leg length: 28.0 m; Diameter: 762mm x 25 mm; HPU: 78 kW; Length: 36.58 m (140 ...
Manufactured by:Winamac Coil Spring, Inc. (WCS) based inKewanna, INDIANA (USA)
Torsion springs can be used to neutralize, lift, rotate, and or center rotating loads or torques. Single Torsion springs are produced at Winamac Coil Spring on computer controlled equipment. A wide variety of leg lengths, shapes, anchoring configurations and coil diameters are available to meet your torsion spring ...
Manufactured by:Modular Pontoon Systems BV based inAalst (GLD), NETHERLANDS
Length: 36.58 m. (12 ft); Width: 12.19 m. (40 ft); Side depth: 1.98 m. (6.5 ft); Water depth: 8.0 m; Spud legs: 4; Spud leg length: 12.0 m; Diameter: 762mm x 25 mm; HPU: 78 kW; Winches: 4 pc. Single drum SD7 ...
Manufactured by:Oertli Instrumente AG based inBerneck, SWITZERLAND
I/A Quick Tip for use without irrigation sleeve, 45° aspiration port 0.35 mm, diameter 1.8 mm, leg-length 1.5 mm, for incisions of 2.8-3.2 mm, ...
Manufactured by:Roller Die + Forming based inLouisville, KENTUCKY (USA)
Roll formed metal angles are fundamental profiles in the roll forming industry, distinguished by their simplicity and versatility. These angles typically feature equal leg lengths, though Roller Die offers a variety of leg configurations to meet diverse needs. The company excels in maintaining tight tolerances on both the legs ...
Manufactured by:SIOEN nv based inArdooie, BELGIUM
When working in dangerous and busy environments it is imperative you are very good visible. Thanks to the fluorescent colour and the reflective striping over the entire leg length you will definitely stand out with these trousers. Because of the inherent flame retardant properties of the fabric, the Empe trousers also protect against burns and splashes of molten ...
Manufactured by:Fuse Medical Inc. based inRichardson, TEXAS (USA)
Designed to facilitate reproducible results allowing total hip replacement patients to return back to their personalized level of activity. Built to achieve optimal alignment, desired leg length, and rotational stability. Streamlined, two-tray instrumentation system to complement the surgical technique. ...
Manufactured by:Intellijoint Surgical Inc. based inKitchener, ONTARIO (CANADA)
It provides real-time, intraoperative measurements for fast, easy and accurate implant alignment for cup position, leg length and offset. ...
Manufactured by:Consensus Orthopedics based inEl Dorado Hills, CALIFORNIA (USA)
The UniSyn Hip System features patented connection technology that allows the surgeon to independently fit the diaphysis and metaphysis, and then select the neck component that will best restore leg length, offset and anteversion of the patient’s hip joint. 59 Head Centers ¦ Infinite Version Control ¦ Titanium Plasma Surface ...
Manufactured by:Kinamed Incorporated based inCamarillo, CALIFORNIA (USA)
NaviPro® is the first truly practical and affordable navigation system that provides the surgeon with the ability to determine cup position, leg length and femoral offset with newfound accuracy. ...
Manufactured by:Neptune Marine based inHardinxveld-Giessendam, NETHERLANDS
The EuroJack-Up is a multi-purpose jack-up barge design, which offers solutions to all kinds of maritime operations such as offshore construction. It can be modified to fit your demands. This could either be the installation of propulsion, or the installation of a heavy lift crane to fit your ...
Manufactured by:MESPA based inGaziantep, TURKEY
Instrument and Medicine Cupboard; Stainless steel main structure. Adjustable three shelves. Lockable 270° opened glass doors. 4 mm thickness tempered glass. Adjustable four ...
Manufactured by:Physiomed based inDeira, UNITED ARAB EMIRATES
Ideal Plus 7 section couch incomparable armrests and gas strut head and foot sections. All other features are identical to the ideal plus 2 and 3 section ...
Manufactured by:American Optics – Endoscope Replacement Parts (AO-ERP) based inMaryland Heights, MONTANA (USA)
Complete 3 Piece Light Guide Tube (Universal Cord) For Fujinon Video Scopes - Includes "Y" Section & Threaded Endfittings; For Manufacturer: Fujinon. Material: N/A. For Model(s): Video Scopes. AO-ERP P/N: 615303. Main Tube: 13.80mm OD. Short "Y" Leg: 13.80mm OD. Long "Y" Leg: 9.70mm OD. Overall Length: 1535mm. Length ...
Manufactured by:Physiomed based inDeira, UNITED ARAB EMIRATES
Designed and constructed using modern engineering techniques and manufactured from the finest material to the highest standard. Ideal plus variable couches are the vision of tomorrow, featuring double gas struts configuration at head section, twin lift stability, open base design, self leveling feet and available in choice of 5 vibrant colors, the Ideal Plus range combines quality and durability ...