Critically Ill Equipment & Supplies
-
Manufactured by SakoMed, LLCbased in USA
Extensive Capabilities for Patient Transport Transporting a critically ill patient through the hospital requires a lightweight device with extensive monitoring capabilities. And that’s exactly what you get with the X Series®—plus a defibrillator and real-time CPR feedback in one compact ...
-
Manufactured by Herida Healthcare Limited, By Winn Carebased in UNITED KINGDOM
The high specification, Herida Cornwall™ intensive care bed has been developed to be used for the demanding requirements on those patients classified up to and including critically ill categories. The high specification, Herida Cornwall™ intensive care bed has been developed to be used for the demanding requirements on those patients classified up ...
-
by Diasorinbased in ITALY
Sepsis can be difficult to distinguish from other non-infectious conditions in critically ill patients with clinical sign of acute inflammation. However, therapies and outcomes may differ significantly between patients with and without sepsis. Among the potentially available laboratory parameters, Procalcitonin (PCT) has the highest diagnostic accuracy. ...
-
Manufactured by Time Medical Holdingbased in CHINA
The NEONA MRI was designed from the onset to address very special needs including the Neonates that reside in the neonatal intensive-care unit (NICU) of large Medical Facilities. The design plan involved addressing two major problem areas that are particularly unique for this segment of critically ill infants. ...
-
Manufactured by Getinge ABbased in SWEDEN
PulsioFlex® is a flexible platform with intelligent visualization for advanced hemodynamic patient monitoring. The life of your critically ill patient depends on making the right therapeutic decision. To achieve this, you need trusted information you can rely on – such as a broad set of reliable hemodynamic parameters so you can determine the best ...
-
Manufactured by Radiometer Medical ApSbased in DENMARK
In a matter of seconds, you have the input you need to make the right diagnostic decisions for your critically ill ...
-
Manufactured by Aspect Imaging Ltd.based in USA
The Embrace Neonatal MRI System from Aspect Imaging is the first FDA-cleared, CE-approved MRI system, designed specifically for use on critically-ill babies inside the NICU. The system features state-of-the-art technology and a compact, self-shielded design to deliver high-quality neonatal neuroimaging at the point-of-care for quicker assessment, diagnosis and ...
-
Manufactured by Baxter International Inc.based in USA
The innovative Prismaflex System is designed to support the recovery of critically ill patients with acute kidney injury (AKI). The flexible system meets the demands of multiple therapies with a versatile platform that can be customized to specific patient ...
-
Manufactured by Mermaid Medical Groupbased in DENMARK
The Angel Catheter is an IVC filter permanently attached to a triple lumen central venous catheter. The smart, elegant design of the Angel Catheter provides critical care physicians and their patients with prophylactic PE protection and guarantees IVC filter retrieval, a game changing promise that no other IVC filter can make. As the first and only IVC filter to receive FDA ...
-
Manufactured by Nova Biomedicalbased in USA
The only glucose meters cleared by US FDA and Health Canada for use with all patients, including critically ill. Because of the unacceptably high rate of adverse patient events, including deaths, linked to the point-of-care (POC) use of glucose meters within hospitals, there is a recognized need for more accuracy and better performance standards for POC glucose ...
-
Manufactured by Abiomedbased in USA
Impella 5.0 and Impella LD heart pumps allow patients to walk around while on support to improve recovery, if inserted via the axillary artery near the shoulder. These heart pumps allow for the opportunity to provide longer duration of support for critically ill patients and a longer period to assess heart ...
-
Manufactured by EVA Therapeutics, Inc.based in JAPAN
In critically ill patients with respiratory failure, mechanical ventilation and extracorporeal membrane oxygenation are used as standard treatments to provide vital oxygenation. However, in general, their use requires advanced medical resources and highly invasive procedures, potentially making the some of the patients contraindicated. ...
-
Manufactured by DEAS S.R.L.based in ITALY
Adequate inspired gas temperatures are associated with a lower incidence of pneumothorax and a decreased severity of chronic lung disease in ventilated very low birth weight infants. Critically ill neonates are commonly managed in incubators or on radiant warmers, and the delivered gas is exposed to two different temperatures, room temperature and the temperature ...
-
Manufactured by Cook Medical LLCbased in USA
The central venous catheter is designed for treatment of critically ill patients and is suggested for: 1. Continuous or intermittent drug infusions; 2. Central venous blood pressure monitoring (CVP); 3. Acute hyperalimentation; 4. Blood sampling; 5. Delivery of whole blood or blood products; 6. Simultaneous, separate infusion of drugs. ...
-
Manufactured by Simulab Corporationbased in USA
With this true-to-life hand and arm model, users can safely practice arterial cannulation, ABG, and arterial puncture to complete continuous blood pressure measurement and blood gas sampling in critically ill ...
-
based in USA
The next time you want to know how your cEEG patients are doing, take a quick look via Persyst Multi-Patient Monitor. Continuous EEG (cEEG) monitoring allows unprecedented clinical insights into the brain function of critically ill patients. However, effectively monitoring multiple recordings simultaneously is a challenge. Within centralized EEG monitoring ...
-
Manufactured by Radiometer Medical ApSbased in DENMARK
The ABL800 FLEX blood gas analyzer allows you to measure a full panel of up to 18 STAT parameters on the same blood sample. This supports fast diagnosis of critically ill ...
-
based in USA
Using pH to confirm NG/OG tube placement is Evidenced Based Best Practice. Immediate confirmation of gastric acidity for NG/OG tube placement, without exposure to x-ray. 2005 and 2010, 45% of all cases of harm caused by a misplaced NGT reported by the United Kingdom’s National Patient Safety Agency were due to misinterpreted X-rays. ...
-
Manufactured by Baxter International Inc.based in USA
The PrisMax System is designed to give healthcare professionals more confidence in the delivery of continuous renal replacement therapy (CRRT) and therapeutic plasma exchange (TPE) ...
-
Manufactured by Vapothermbased in USA
The Automatic Oxygen Controller for Vapotherm’s Precision Flow® ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you