FerrAlert - Model Solo - Ferromagnetic Detector for Zone II & III Pre-Screening

Proprietary AMR Sensor Technology used in FerrAlert™ detectors proven to be most sensitive in 'Real World' MRI environment

Raw sensitivity is only meaningful if you are in the ocean looking for an isolated ferromagnetic object ( e.g. submarine). In such environment there are few other ferromagnetic, moving objects to interfere with sensing.

In the real environment of a hospital, where many ferromagnetic objects are moving all the time, you must be able to discriminate between 'real' threats and objects that are ferromagnetic but not a threat.

• Pinpoints Location of the ferromagnetic threat allowing the Technologist to quickly and easily identify and remove it. NO invasive pat-down or hand-held detectors required.
• Intelligent Visual Warning is triggered by approaching ferrous objects
• Self-Screening or supervised screening is consistent, unambiguous and simple
• No-Touch Activation safeguards against dangerous cross-contamination
• Patented Technology suppresses false alarms and warnings while providing the highest sensitivity to ferromagnetic threats. The use of 12 sensors ensures uniform sensitivity and detection reliability from head to toe. For a list of international patents: click here
• Reduces Alarm Fatigue by not producing acoustic alarm unles the presence of human body is detected (body heat sensor)

• Continuous Magnetic Disturbance Monitoring provides instant feedback via integrated and highly visible bar graphs
• Safe Passive Detection No electromagnetic radiation, RF radiation, or magnetic field
• Adjustable Sensitivity and Audio Alarm Levels
• Confirms to ALL Applicable Recommendations and Standards including FDA, ACR AAMI, Joint Commission, FGI and VA
• Comprehensive Self-Test Function for hospital periodic maintenance, as well as piece of mind
• Integrates esasily into any established screening procedures. Elegant, small footprint installation
• Inexpensive - affordable for all MRI facilities
• FerrAlert™Approved Patient Transport Equipment will not trigger an alarm

• Dimensions: Height 86 ¼” (220 cm), Depth 2 ½” (6.5 cm), Width 2” (5 cm)
• Complies with ES60601-1-8 International Standards for Medical Device Alarms
• Complies with IEC 60601-1:2005 Medical Device Specification Requirements
• Medical Power Supply: 100 to 240 VAC, 47 to 63 Hz, 42 Watts
• Ambient Magnetic Disturbance Indicator: Eight (8) blue bars
• Sensitivity: Adjustable
• Audio Alarm: Selectable, adjustable volume
• Mounting: Wall or free-standing with optional basel
• Battery Operation: Optional