Entermed FUTURENT - Model III - ENT Treatment Units

Superior ergonomic design

• Scratch and stain resistant : The dual-level worktop is available in scratch and stain resistant coloured glass, Marlan synthetic granite and Thermopal laminate. 
• Efficient use of space : The instrument plateaus and handpiece holders are close together to prevent the user from overstretching.
• Fully integrated : External devices and equipment, such as a patient examination chair, audiometer and room lighting, can be connected to the FUTURENT III® to allow central operation of all equipment. 

Maximum hygiene

• Designed without handles and knobs  : In order to stay one step ahead of the hygiene regulations, the FUTURENT® III is designed without handles and knobs and is easy to clean thanks to the high quality materials used in the design.
• Easy to open and close : The push-to-open, soft-close drawers make it easy for the user to open and close the drawers without the need for handles.

Integrated software solutions

• Integrated touch-screen console : The integrated touch-screen allows the user to control all devices from a single point.
• Easy to activate automatic functions : Functions are automatically activated by a simple action such as taking a device out of the holder.

The FUTURENT® III ENT treatment unit is designed and built with the highest quality standards and is therefor low maintainance.

The suction and air pumps are dry and thus there is no need to top up or replenish oil. All knobs and buttons have been replaced with virtual buttons.

The optic sensors are reliable and do not need to be replaced periodically.

The FUTURENT® III can be equipped with a wide selection of integrated functions to accommodate specific requirements.

• Suction system
• Rinsing facility for hose and secretion receptacle
• Cordless examination headlight
• Automatic secretion discharge with automatic cleaning
• Small basin with irrigation
• Compressed air c/w 3 atomizers
• LED fibre optic light source
• Warm water irrigator and caloric testing
• Heated or non-heated rigid telescope holders
• Flexible scope holder
• Cautery power sockets
• Low voltage power source
• Examination microscope
• Full HD video endoscopy imaging system
• 24” Full HD monitor
• LED stroboscope
• 100 W coagulator
• Radio frequency ESU
• Rhinomanometer
• Tympanometer with EFT function
• Sinus echography
• Mirror preheater rack
• Hot air mirror heater

• Voltage : 230 Volt AC - 50/60 Hz
• Power : 2300 VA (circa 2000 Watt)
• Weight : 230 kg
• Dimensions : 1520 (w) x 830 (d) x 1040 (h) mm