Medical Monitoring Product Applications For The Medical / Health Care Industry
-
Premium
Chemiluminescense based analyzer for medical industry
Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Communication Software for Hospitals
RapidReach has a number of applications that can be utilised for both emergencies and operational purposes in hospitals and healthcare ...
By Enera International AB based in Mölndal, SWEDEN.
-
Medical Devices for Causes Heart Failure
Heart Failure may start suddenly, and you may feel symptoms immediately, or it may start slowly and progress unnoticed for some time. Some patients do not realize that they have heart failure because they believe that their symptoms are just indications of getting older. The condition typically starts after there is some sort of injury to the heart muscle (e.g. a heart attack), and over time, the unusual stresses placed on the heart muscle cause the disease to progressively ...
By Impulse Dynamics based in Marlton, NEW JERSEY (USA).
-
Medical cannabis solutions for regulatory pathway sector
Health Canada recently released “Proposed Regulations Amending the Cannabis Regulations (new classes of cannabis) and Proposed Order Amending Schedules 3 and 4 to the Cannabis Act”. These proposed changes introduce three new classes of cannabis products: edibles, concentrates and topicals. The introduction of these new classes may present an opportunity for the Company to bring combination products to the market as an adult-use edible cannabis product. It is proposed that only approved food ingredients ...
By CanaQuest Medical Corp. based in Mississauga, ONTARIO (CANADA).
-
Environmental & power monitoring equipments for medical applications
It is imperative that medical environments are closely monitored and logs are stored for analysis and auditing purposes. Jacarta monitoring products are used by medical organisations in two main ways: Firstly, Jacarta devices and sensors are used to monitor conditions where no sensors are currently deployed. A range of high-quality sensors are available to monitor a variety of temperature ranges – from ambient room temperatures down to extreme temperatures found in some research and testing facilities. ...
By Jacarta Ltd. based in Marlborough, UNITED KINGDOM.
-
Temperature and gas sensing solutions products for medical applications
Shorten product development, increase reliability, and benefit from compliance expertise. Increased lifestyle conditions, patient lifespans, and outpatient procedures are transforming medical equipment. Equipment needs to be more mobile, include data storage and insight capabilities, and be more precise than ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Wireless Sensor for Medical Applications
In modern medicine there is a constant demand to collect data about patients’ physical, physiological and behavior, monitor medical instruments inside hospitals to reduce multiple systems or shortage, monitor hospital staff’s hygiene with a dedicated bracelet and many other applications that requires monitoring and data ...
By Sol Chip Ltd. based in Haifa, ISRAEL.
-
PTR-MS systems for medical applications
PTR-MS are powerful tools for non-invasive, real-time breath gas analysis with many applications, such as screening for disease markers, study of pharmacokinetics or metabolic ...
By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.
-
Laser micromachining systems for medical device manufacturing sector
Laser micro processing is a technology that enables the manufacturing of components with micron accuracy. For the medical application such as stent therapy (especially in coronary heart disease), catheters, IOL (Intraocular Lenses), vascular clips, surgical staples, hollow needles, endoscopes, hypo tubes the highest micro material processing quality demands. Laser micromachining provides extremely gentle processing method that causes continuous growth of this industry. The ultrashort high-energy laser pulses allow ...
By AKONEER based in Vilnius, LITHUANIA.
-
Medical Devices for Diagnosis and Evaluation
The diagnosis of heart failure typically starts when a patient talks to their caregiver about the signs and symptoms they are experiencing. Their health care provider may ask questions designed to confirm the causes of heart failure that may be in their medical history as ...
By Impulse Dynamics based in Marlton, NEW JERSEY (USA).
-
Plasmatherapies
The term plasmapheresis encompass different techniques (filtration or adsorption on plasma), which remove not all but only specific elements contained in the plasma, and altogether allow to treat a large number of diseases. ...
By Infomed SA based in Meinier, SWITZERLAND.
-
Hyperbaric Oxygen Therapy for Elderly People
Inside the hyperbaric chamber, a user will absorb oxygen close to four times the normal breathing ...
By OXYHELP INDUSTRY based in Bucuresti, ROMANIA.
-
Ultrasound measurement instrumentation solutions for physiotherapy sector
Employing ultrasound to improve blood circulation is an established technique, particularly in sports medicine to treat muscle and ligament injuries. Unlike diagnostic ultrasound imaging, the total acoustic power is sufficient to cause a low level of tissue heating making it vital to accurately control the acoustic ...
By Onda Corporation based in Sunnyvale, CALIFORNIA (USA).
-
Patients - Getting It All – Better Cancer Resections with FIRE – Guided Surgery
The Promise: With modern diagnostic and imaging technologies, cancer can be detected earlier than ever before. And with earlier detection comes the promise of a surgical cure—that is, the complete removal (or resection) of all tumor tissue from a patient. Research has shown that patients with surgical cures have fewer complications in recovery and a greatly enhanced survival rate when compared to patients who do not achieve surgical ...
By Akrotome Imaging, Inc. based in Cleveland, OHIO (USA).
-
Radiation and chemical detection instrumentation for Medical industry
Radioactive isotopes are used in nuclear medicine to image, diagnose, and treat. Likewise x-rays are used in both diagnosis and treatment. Both x-ray machines and radioisotopes are potentially hazardous to patients and medical workers and need careful monitoring. Radiopharmacies are increasing with new and innovative treatments utilizing isotopes. Hospital populations are among the most vulnerable to radiation leaks or outside intrusions. US Nuclear Corp provides equipment and instrumentation to protect ...
By US Nuclear Corporation based in Canoga Park, CALIFORNIA (USA).
-
Investors - Akrotome FIRE
Advances in diagnostic methods have enabled the detection of cancer at the earliest stages when the chances for successful intervention are highest. For many solid tumors, the best chance for a cure is surgery. A surgical cure depends upon the complete removal of all cancer tissue from a patient (a “complete resection”). The main challenge of this approach is that it is very difficult for a surgeon to determine where diseased tissue ends and healthy tissue begins. The result is that many surgical ...
By Akrotome Imaging, Inc. based in Cleveland, OHIO (USA).
-
Medical Devices for Severe or Advanced Stage Heart Failure Treatment
In the most advanced stages of heart failure, in some cases, doctors recommend surgery to treat the disease. Heart Transplant & Ventricular Assist Devices are included in this category. These therapies are often a last option for patients with the most severe forms of heart ...
By Impulse Dynamics based in Marlton, NEW JERSEY (USA).
-
Carbon technology solutions for medical industry
Thermal Management: Pyroid HT pyrolytic graphite thermal spreaders and thermal vias are a powerful new material solution in the battle against thermal heat in state-of-the-art electronic circuits and devices. HT material matches the heat spreading capability of CVD diamond at 1700 W/mK but at substantially better economics. ...
By CETCO based in New York, NEW YORK (USA).
-
Ventilation solutions for hospital industry
Flight medical ventilators offer a solution for Hospitals environment. They are innovative and powerful for virtually all hospital contingencies and a wide range of patients. Their efficiency and versatility make them the most cost-effective ventilation solution in a diversified hospital ...
By Flight Medical Innovations Ltd. based in Petah Tikva,, ISRAEL.
-
Corneal Transplant
A corneal transplant involves the surgical replacement of a diseased or injured donor cornea with a healthy portion of a donor cornea. The disease or injury causes blindness by interfering with the normal passage of light into the eye. The transplant of clear, healthy donor tissue restores the normal visual pathway. Most corneal transplant that have been performed are full thickness or “penetrating” corneal transplants. The medical term for a corneal transplant is “keratoplasty”. A ...
By Cornea Biosciences, Inc. based in Rancho Santa Margarita, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you